Store PLCnext CommunityPLCnext on LinkedInPLCnext on Instagram  PLCnext on YouTube Github PLCnext CommunityStore PLCnext Community

  1. Felipe González
  2. Container @ PLCnext (Docker, Moby, balena)
  3. Friday, 28 August 2020

Hello, how can I install node-red-contrib-iiot-opcua using docker? Before I installed it only using the command npm install node-red-contrib-iiot-opcua, I tried to install it using the node-red palette but node not found.

Attachment node link:

Accepted Answer
Dries Van Laerhoven Accepted Answer Pending Moderation

Hi All


Seems like I'm a bit late to the thread, but if anyone has the same problem.

I've an prebuild image with opc-ua nodes in it.

use :

balena-engine run -it -p 1880:1880 --name nodered --restart always pxcbe/node-red:opcua


Kind regards



Stefan Brinkmann Accepted Answer Pending Moderation



wenn you try to install something via the node-red palette and it does not find any nodes, then probably the container does not have access to the internet. I had the same issue.

In my case the firewall settings were incorrect. Please also check the github repository. There is a workaround for firmware version 2020.6 to disable the firewall.

  • Page :
  • 1

There are no replies made for this post yet.
However, you are not allowed to reply to this post.