Webinar: Setup the PLCnext Starterkit

Date: 09 July 2020

Time: 10:00 AM (CET), Germany 10:00 AM (LT)

Language: English

Speaker: Götz Jäckel

In this webinar you will be part of a live demonstration of setting up the PLCnext starterkit. During the demo the IO configuration of Axioline implemented. You'll also be participating with your own PLCnext Technology starterkit to experience the OPC UA communication first hand. But don't worry - you can also join the webinar if you don't have a starterkit available. After the demonstation there will be time to answer your individual questions.

Check in for Webinar

Prior knowledge

Basic knowledge of automation engineering




For the session it is necessary to provide an ethernet adapter supporting the IP range of 192.168.1.x.



Length: ca. 45 min

  1. Introduction and Explanation of the topic (5min)
  2. Hands-on demonstration on PLCnext Technology starterkit (30min)
  3. Q&A (10min) 


Webinar goal

 By completing this webinar you'll know how to establish communication between the PLCnext Engineer and the AXC F 2152 of the starterkit and its Axioline modules.


About the speaker

Götz Jäckel is a trainer as part of the sales team at PHOENIX CONTACT Electronics GmbH, Industry Management and Automation. He looks back on over 20 years of experience in automation technology and has been sharing his knowledge in webinars and seminars for the past 5 years.