AXC F XT SPLC 1000 (SPLC 1000) Note: For further information about the hardware, refer to the product documentation of this controller (item no. 1159811): User manual Product page Connecting and operating elements The controller consists of the following components: 1 Function identification 2 Bus base module… Read More
Secure by default: Secure boot The controller supports the secure boot function. During the boot process, digital signatures are used to check whether the firmware has been compromised. Firmware that is detected as compromised is not loaded. In this case, the CSEC LED starts to light up permanently… Read More
AXC F 2152 The Security Profile must be activated, the left-alignable Ethernet module must be installed and the corresponding bus base module must be used. Note: For further information about the controller (item no. 2404267), refer to the respective product documentation: User manual Product page AXC F 2152… Read More
Updating the firmware Note: If the boot process failed five consecutive times then the inactive and the active boot partition will change their roles. This behavior has been implemented to keep the PLCnext Control device accessible even if the firmware update fails. The behavior can also occur when the boot… Read More
AXC F 3152 Note: For further information about the hardware, refer to the product documentation of this controller (item no. 1069208): User manual Product page There are different Ethernet and firewall configurations due to three Ethernet interfaces. Connecting and operating elements The controller consists of… Read More
BPC 9102S Note: For further information about the hardware, refer to the product documentation of this controller (item no. 1246285): User manual Product page Connecting and operating elements The controller consists of the following components: 1 BPC 9102S 2 BPC 9102 FAN KIT… Read More
Certificates In the following you find the IEC 62443 certificates and the functional safety certificates as well as the IEC 62443-4-2 compliance list. • Published/reviewed: 2026-02-23 • Revision 021 • … Read More
Controller-specific information on the 62443-4-2 compliance list OpenSSL The OpenSSL library has been updated to version 3.0. The PLCnext Technology firmware uses this version only. For compatibility reasons the previous OpenSSL library (version 1.1.1) still exists in the file system. As this version is outdated, it has been removed… Read More
Protection against physical access Protection against physical access is an important requirement for OT devices (component). Attackers may access the hardware and try to manipulate the firmware, configuration, or applications. IEC 62443 describes major attack vectors, like: non-operational transferring the component from the manufacturer to the… Read More
AXC F 1152 Note: For further information about the hardware, refer to the product documentation of this controller (item no. 1151412): User manual Product page The AXC F 1152 is approved for certified security based on a limited scope. The AXC F 1152 does not support left-alignable modules and therefore network segmentation is not… Read More
